This page features melters for wax and other products with melting temperatures up to 250F(121C) Click HERE to see our premium melters for melting temperatures up to 450F(232C)
All Wenesco melting pots utilize even convection heating designed and are built to safely melt "soft" materials that liquefy at temperatures up to 250F.

               Convection heated melters have many advantages over 
                                 direct heat or water jacket melters.
1. There is no hot water to spill or evaporate with convection heating. Ours cool quickly when turned off and the pot is empty. The water in the jacket retains heat for a very long time.
2. Unlike uninsulated water jacket melters, convection melters  are fully insulated. The exterior remains cool during use which helps prevent accidental burns and conserve energy.  
3. Convection provides even heat.  Heat up time is usually 1-1/2 to 2 hours. There are no hot spots like a direct heat melter. This means less danger of burning your product if you have no stirrer in the melting pot.
 4. Our accurate digital temperature control ensures that you will not overheat sensitive products.  The air temperature in the jacket will never exceed your setting..
 5. Convection heating can be used with little danger of burning out heating elements.  The high watt density element in a water jacket melter will  burn out if the water level falls and exposes the immersion element.


Model MW 20
Model MW15R 



bullet A heated drain valve with independent control is included in all models.
bullet Stirrers and pumps are available with all models. Stirrers are available with standard or special 
blades depending on the viscocity of the melt.
bullet Custom-made melters are available up to 600 gallons.
Model Power Quarts Lbs,wax Inside inches Outsideinches Ship Wtpounds Price
MW10 120 V, 1580W 40 70 16 dia x 12 h 24 dia X 23 h 50 €2,100
MW20 120 V, 2080W 80 140 19 dia x 18h 32 dia X 30h 120 €2,300
MW15R 120 V, 1730W 60 105 21 x 14 x 12h 25 X 18 X17h 75 €2,200


Model MPV15 is an industrial quality dispensing system constructed for long life and dependable performance. Wax temperature is held constant  throughout the system because the pump and most of the plumbing are immersed in the wax. (See schematic drawing below.)
beeswax-melter-4.jpg beeswax-melter-4.jpg
MPV15A showing control panel with digital thermostat for tank, 
digital thermostat for hose, and solid state flow control for pump
Model MPV15A shown with dispensing gun and
optional stirrer.  Size increased to 20 GAL to accommodate stirrer.
bullet Model MPV15 is a 15-gallon melting tank that is fully insulated and convection-heated for fast, even heating for use with all types of wax to 250F (121C)

Heater elements are easily accessible


Tank liner and all wetted parts made from stainless steel


Heated Tank inside dimensions: are 21Ѕ x 14Ѕ x 12Ѕ in


Tank housing with hinged removable cover, 25 x 18 x 17 in


Stainless steel heated drain valve 


Operates on 120 or 240V (Please specify preference.)

bullet Centrifugal stainless steel pump with adjustable flow rate to 9 gpm

Flexible heated hose is 6-ft long with a reliable dispensing gun


Temperature of the wax in the melter and the hose are closely controlled with 
twin digital thermostats. Current temperature and set point displayed in C or F


Price: $5,685.00. (Price higher for machineable was; please request quote.)


 We get letters

"I just want to thank Jon & the others for repairing my melter so quickly! It works better than before...and it is melting that super-hard palm wax in less time.... The spigot is hotter...so I can access my wax more quickly! In the candle business, when you are a sole proprietor, time is money!  And thank you very, very much for cleaning the exterior. My melter looks brand-new! You folks will always have my business in melters as my company grows! Thank you again very much!" 
                                                       Roxie Hein, Starfire Candle Studio
"Recently, I brought one of our jacketed wax melting pots into the Wenesco factory for repairs. ...Basically, the unit was totally refurbished.  ...Thank you for the courteous and outstanding service that you provide.  It is a pleasure to do business with Wenesco."
Joan Pikas, Bright Endeavors
"I am sure that most of you have already heard this a million times but let's make it a million and one!
  From start to finish of our Melter, your corporation has never failed to be professionals in what you do. I never called your number without getting the answer to my question(s). Within 2 hours of receiving this Melter, it was hooked up and melting my product. The production was given a time frame and it was met within reason. This Melter is very attractive and everyone that is affiliated with Wenesco should be very proud of themselves. Once again. Thank You so much from the Clean the World Family!! You have made a mark on the history of saving lives and that is what we are all about! We look forward to a long relationship with Wenesco Corporation.
    I would appreciate those of you receiving this email to forward it to those that had their hands and their minds involved in this Great Product! We can''t thank you enough."

                             Steven Smith, Operational Engineer, Clean the World